Cigweld Transmig 330 + 2R wirefeeder

• MIG welder
• Three Phase
• 25 – 330A output
• 330A at 30% duty cycle
• Euro MIG torch fitting set up for 1.2 flux cored welding
• Set up with PDL 36 series plug
• Remote wire feeder (2 drive)
• Comes with mig gun and earth lead / clamp. Requires gas regulator

$235.00 +GST per week

Lincoln PC100 plasma cutter

• Plasma cutter
• Three Phase- 400V
• 20 - 100A output
• 100A at 35% duty cycle
• Cuts up to 35mm severance cut
• No HF required for arc start- safer for electronic equipment.
• 235 x 330 x 615mm x 37.5 kg
• Requires an external compressor
• Consumables extra

$260.00 + GST per week

Lincoln Powerwave STT II

• MIG welder
• Three Phase
• STT Technology for superior bead shape and low welding costs.
• Runs a wide range of wire and gas
• 200A / 28V at 100% duty cycle
• 225A / 29V at 60% duty cycle
• Comes with Powerfeed 10 wirefeeder and mig gun.
• Set up with PDL 36 series plug
• Come with stand
• Very good condition.

Please note- above picture is of a new unit only.

Lincoln LN22

• Gasless Wire feeder
• Voltage sensing
• Flux cored wires only
• Maximum wire size 2.0mm
• Comes with K126 innersheild gun
• Consumables extra

Lincoln LT-56 Subarc welder

Please note that this is a picture of a new machine, not the one for sale

• AC/DC tandem arc submerged arc welder.
• Solid state controls similar to an LT7.
• Runs 3/32 to 3/16 wire sizes.
• Rated 1500a on AC and DC, 6 - 100 inches per minute, 4 inch vertical adjustment, 2 inch horizontal adjustment.
• Flux capacity 30 pound
• Joint versatility- can do Horizontal fillets, lap joints, butt welds, or flat fillet joints.
• Interchangeable parts with NA3, NA4, or LT7
• Lockable adjustment.
• Dimensions 1.16 x 0.44 x 1.37m x 170 kg

Miller Big Blue 400D

• Deutz Diesel engine- 3 cylinder, industrial air/oil-cooled, 45l tank
• Good for stick, mig, arc air gouging, tig.
• CV /CC outputs.
• 400A at 36V (14.4 kW), 100% duty cycle
• 45 - 500a output.
• 861kg in weight
• Excellent condition.

Description:

WIA weldmatic 305 Mig

• MIG welder
• Three Phase
• Set up for 0.8 and 1.0mm mig wire
• Comes with mig gun and earth lead / clamp. Requires gas regulator
• Machine is in very good condition and has been test run

Description: Lincoln DC600

• Multiprocess unit
• Three Phase
• Stick, arc air, MIG, Sub arc settings
• VV / CV modes
• 2 stud model
• Machine runs excellent

Miller Millermatic S54-A wirefeeder

• Wire feeder
• Comes with an 8m gas and welding cables.
• New TBI 360 mig gun.

Lincoln Idealarc DC600

• Suitable for heavy duty mig, stick, arc air gouging, and subarc.
• Current range- 70- 600A
• Duty cycle- 600A, 44V @ 100% Extras-
• Arc air torches
• Wirefeeders
• Welding cable
• Long term hire options available