Cigweld Transmig 330 + 2R wirefeeder

• MIG welder
• Three Phase
• 25 – 330A output
• 330A at 30% duty cycle
• Euro MIG torch fitting set up for 1.2 flux cored welding
• Set up with PDL 36 series plug
• Remote wire feeder (2 drive)
• Comes with mig gun and earth lead / clamp. Requires gas regulator

$235.00 +GST per week

Lincoln PC100 plasma cutter

• Plasma cutter
• Three Phase- 400V
• 20 - 100A output
• 100A at 35% duty cycle
• Cuts up to 35mm severance cut
• No HF required for arc start- safer for electronic equipment.
• 235 x 330 x 615mm x 37.5 kg
• Requires an external compressor
• Consumables extra

$260.00 + GST per week

Lincoln Idealarc DC600

• Suitable for heavy duty mig, stick, arc air gouging, and subarc.
• Current range- 70- 600A
• Duty cycle- 600A, 44V @ 100% Extras-
• Arc air torches
• Wirefeeders
• Welding cable
• Long term hire options available

Lincoln LN25

• Voltage sensing Gas / Gasless wirefeeder
• Runs off most DC power sources
• Weight- 15.5kg (not incl wire)
• Runs 0.6mm - 1.2mm solid wire / 0.9mm - 2.0mm flux cored wire
• Fitted with MIG gun or K126 innersheild gun
• Consumables extra
• Full range of wire to suit various applications

Lincoln Invertec V145

• 145A DC Stick welder
• Single Phase 240V
• Light weight- 6Kg
• Stick welds 3.2mm electrode hot
• Generator compatible

Liquid arc Handymig 170I

• 170A mig welder
• Single Phase- 240V
• Workshop welder
• Welds 0.6mm-0.8mm solid mig wire or 0.9mm-1.2mm gasless wire
• Easy to use
• Consumables extra
• Requires gas bottle if using solid mig wire
• Regulator included

Lincoln LN22

• Gasless Wire feeder
• Voltage sensing
• Flux cored wires only
• Requires external DC power source
• Maximum wire size 2.0mm
• Comes with K126 innersheild gun
• Consumables extra

Cigweld Transtig 16PI

• 160A DC Stick / Tig welder- stainless and carbon steel
• Single Phase- 240V
• Stick weld 4mm hot
• 160A output
• HF tig with Pulse functions
• Requires Argon bottle
• Regulator and tig torch supplied

Lincoln Invertec V160TP

• 160A DC Stick / Tig welder- Stainless and carbon steel
• Single Phase- 240V
• Light weight- 11.5kg
• Stick weld 4mm electrode hot
• 160A output
• HF tig with Pulse functions
• Requires Argon bottle for tig welding
• Regulator and tig torch supplied

Lincoln Invertec V140T

• 140A DC Stick welder
• Single Phase- 240V
• Light weight- 6kg
• Stick welds 3mm electrodes hot
• Lift arc tig up to 2.4mm tungsten
• Requires Argon bottle
• Regulator and tig torch supplied
• Generator compatible